General Circulation Pumps
DILP Series
Cold/hot circulation pump
Standard Type
Applications and Uses
- For hot and cold water circulation
- For hot water circulation
- Pressurized, condensate system
- Cooling tower
Characteristic
- Back Pull-Out type design for easy maintenance
- Standardized suction outlet size
- Vertical type for easy installation space
- Low noise operation due to gentle flow rate
Standard specifications
| Discharge | 0.1 ~ 10㎡/min |
| Total head | ~80m |
| Temperature | -20°C~120°C |
| Rotation speed | 1750rpm, 3500rpm (60Hz) |
| Rotation direction | CW (Viewed from drive end) |
| Packing part | Mechanical Seal |
| Flange specification | Ratings: KS 10Kgf/㎠ (JIS 10Kgf/㎠ ), KS 20Kgf/㎠ (JIS 20Kgf/㎠ ) Facing: FF, RF Location: Side Suction, Side Discharge |
| Material | GC200, SC420, SSC13×14×16(ASTM CF-8, CF-8M, CF-3M) |
Selection degree
Specifications
